SKYSTARS TA LON X110 110mm 2.5inch 3D Print Carbon Fiber RC Drone FPV Racing Frame Kit
A part of the review has been auto-translated.
Since the FC mounting hole is only 20mm × 20mm, 16mm × 16mm mounting is necessary.
Cheap!(^-^) There are plenty of accessories for the cheap Especially the TPU parts come with you to a point where you lose your motivation to produce It may be useful for those who use Toothpick or tynywhoop batteries I don't do toothpick and I don't want to use the battery of tynywhoop Besides, I don't like Sharkfin The camera hits the 16x16 tower I used a camera mount from another company as a countermeasure Results All TPU parts go to the trash can (laughs) The frame itself is not cut, not even chamfered, let alone cross-sectional treatment We only have holes for 20x20 stacks, and when we use 16x16 stacks, we only need to work The motor hole is not a 2mm hole. When using a 2mm screw, this is also necessary. But processing is simple, and if you've worked with Japanese carbon, it might be a little unmotivated Don't worry about this frame Very easy to process (^-^) It's just a moment to drill a new hole or widen the hole It is a highly recommended frame for those who like processing (^-^)